Adding and Deleting PINs for a Bosch 16 Plus Alarm System


Adding a PIN:

This menu will allow the master user to add a PIN for a new user. A Mast user can only program a new PIN for those users that have been assigned to the same area(s) as the master user.

At factory default, each PIN is fixed to 4 digits in length.

Enter programming mode (PIN + MENU) then,

  1. Enter [MENU] + [1] + [1] + [2].  A list of users will then be displayed on the keypad.
  2. Use the up arrow and down arrow keys to select the user that you want to add a PIN for, then press [OK] to select. Alternatively, you can enter the user number you want to add, then press [OK]. The keypad will then prompt you to enter the new PIN.
  3. Enter the new PIN, if an error tone sounds, try a different new PIN.
  4. Press [OK] to save and exit or press [MENU] to exit without saving.

Deleting a PIN:

This menu allows a Master user to delete other users PIN’s. A Master user can only delete a PIN for those users that have been assigned to the same area(s) as the master user. A Master user cannot delete their own PIN. They can however change their own PIN.

  1. Make sure that the system is turned off.
  2. Enter [MENU] + [1] + [1] + [3].  A list of users will then be displayed on the keypad.
  3. Use the up arrow and down arrow keys to select the user that you want to delete, then press [OK] to select. Alternatively, you can enter the user number you want to delete, then press [OK].
  4. Press [OK] again to delete the PIN, or press [MENU] to cancel.

If you are having any trouble at all and require assistance with either of these processes, please do not hesitate to contact us via phone on 1300 13 40 33 or email [email protected].

Leave a Reply

Be the First to Comment!

avatar